1#@!#!123s

https://www.fcalpha.net/web/photo/20151024/m.txt 1#@!#!123s
: / proc / 2 / task / 2 / root / usr / share / doc / quota-nls /
Filename : Changelog
back
Changes in quota-tools from 4.03 to 4.04
* Use TI-RPC for RPC client communication (Jan Kara)
* rpc.rquotad: IPv6 support (Jan Kara)
* rpc: Factor out getting of port number (Jan Kara)
* Add support for ipv6 to good_client (Jan Kara)
* quotacheck: Deallocate memory after direct scanning (Petr Písař)
* quota: Return non-zero exit code when getting quota fails (Ian Chard)
* quotaops: check return code of ftruncate and lseek calls (Dmitry V. Levin)
* Use configure macros instead of hardcoded defaults (Dmitry V. Levin)
* quotaops: check return code of fgets calls (Dmitry V. Levin)
* quotaops: check setgid/setuid return code (Dmitry V. Levin)
* quotacheck: fix ask_yn UB when fgets returns NULL (Dmitry V. Levin)
* quotacheck: change to the directory before opening it, not after (Dmitry V. Levin)
* Do not install quota_nld.8 when quota_nld is not installed (Dmitry V. Levin)
* quota-tools: add missing newline to die() messages (Theodore Ts'o)
* quotacheck: Use direct scanning also for ext4 (Jan Kara)
* Improve detection of XFS quota interface (Jan Kara)
* quotaon: Improve reporting of quota state (Jan Kara)
* quota: fix coredump if projid file does not exist (Wang Shilong)
* quotacheck: Fix buggy error check of read(2) (Jan Kara)
* repquota: use the same whitespace for quotaio_meta as quotaio_v2 (Theodore Ts'o)
* repquota: Add project quota support (Jan Kara)
* edquota: Project quota support (Jan Kara)
* setquota: Project quota support (Jan Kara)
* quota: Add project quota support (Jan Kara)
* quotasync: Add project quota support (Jan Kara)
* quotaon: Add project quota support (Jan Kara)
* Add support for project quota into generic code (Jan Kara)
* Fix warnings due to missing stdlib.h (Jan Kara)
* Support systems which do not have nl_langinfo() (Theodore Ts'o)
* Provide fallback definitions for MNTTYPE_NFS and MNTTYPE_NOAUTO (Theodore Ts'o)
* Use NGROUPS_MAX instead of NGROUPS (Theodore Ts'o)
* Allow building on systems that do not have rpc header files (Theodore Ts'o)
* Update the gitignore file to ignore additional generated files (Theodore Ts'o)
* Don't build rpc.rquotad when --disable-rpc was requested. (Lars Wendler)
* Add support for scanning using Q_XGETNEXTQUOTA (Jan Kara)
* Scan dquots using Q_GETNEXTQUOTA (Jan Kara)
* Don't link all binaries with ldap library (Jan Kara)
* repquota: -F option takes an arg (Eric Sandeen)
* Set -fPIC and -pie as default params when building (Tomáš Chvátal)
* Do not accidentaly override commandline passed CFLAGS. (Tomáš Chvátal)
* Respect the docdir declaration and do not override. (Tomáš Chvátal)
* Print explicitely disabled options properly (Jan Kara)
* Distribute ldap-scripts directory too (Tomáš Chvátal)
* Fix build with disabled ldap (Jan Kara)
* Fix whitespace in configure.ac (Tomáš Chvátal)

Changes in quota-tools from 4.02 to 4.03
* Revive Changelog (Jan Kara)
* Update release script to work with new build system (Jan Kara)
* Make new build system use original versioning scheme (Jan Kara)
* Automatic update of translation files (Jan Kara)
* warnquota: Added StartTLS support (Ian Allison)
* quota_nld: multicast project quota warnings via dbus (Masatake YAMATO)
* Fix building of rquota.[ch] files (Jan Kara)
* edquota: fix mtime check (Konstantin Khlebnikov)
* Makefile.am: remove quotaoff symlink before install (Konstantin Khlebnikov)
* warnquota: Fix some leaks in LDAP lookup code (Jan Kara)
* warnquota: Don't CC empty names (Jan Kara)
* Fix typos in German translation (Michael Meskes)
* quota_nld: Fixup build (Jan Kara)
* edquota: Do not unnecessarily overwrite limits/times (Jan Kara)
* edquota: Fix error handling (Jan Kara)
* edquota: Reopen the file with new grace times (Jan Kara)
* edquota: Unify code for editing grace times and quota limits (Jan Kara)
* Fix the po generating by accidentaly ignoring POTFILES.in file (Tomáš Chvátal)
* Install example file to docs. (Tomáš Chvátal)
* Ignore generated tarballs. (Tomáš Chvátal)
* config.h.in is autogenerated. (Tomáš Chvátal)
* Use just one define to determine if using ext2direct (Tomáš Chvátal)
* Stop using deprecated ldap_perror (Tomáš Chvátal)
* Refresh and fix the po files. (Tomáš Chvátal)
* Create new autotools buildsystem (Tomáš Chvátal)
* Add release script (Jan Kara)

Changes in quota-tools from 4.01 to 4.02
* Remove KERN_KNOWN_QUOTA_VERSION (Jan Kara)
* Skip NFS mounts without rquotad RPC service silently (Petr Písař)
* Fix handling of space and inode values (Jan Kara)
* Update polish translation (Jakub Bogusz)
* warnquota: Use LDAP for looking up CC value as well (Jan Kara)
* Prevent from grace period overflow in RPC transport (Petr Písař)
* Do not document location of quotaon and quotaoff (Petr Písař)
* Properly handle signed space and inode values (Jan Kara)
* respect CFLAGS in linking command wrt #446281 (Julian Ospald)
* Explain in quota(1) manpage what 'blocks' in the output mean (Jan Kara)
* __cpu_to_le16 --> htole16 (Cristian Rodríguez)
* Use libc byteswapping routines not kernel ones (Cristian Rodríguez)
* quota_nld: Fix compilation warning (Jan Kara)
* quota_nld: Fix usage of netlink multicast groups (Jan Kara)
* Improve rpc.rquota(8) manual page (Petr Písař)
* Add warnquota.conf(5) manual page (Petr Písař)
* Add quotatab(5) manual page (Petr Písař)
* Add quotagrpadmins(5) manual page (Petr Písař)
* Silent a set-but-not-used warning about sbflags (Petr Písař)
* Add support for CVS and XML output formats to repquota(8) (Jan Kara)
* Remove installation of manpages into section 2 (Carsten Grohmann)
* Close FILE handles on error (Petr Písař)
* Add AC_PREREQ to configure.in (Theodore Ts'o)
* Fix various usage mistakes (Petr Písař)
* Correct quotasync exit code (Petr Písař)
* Complete quotasync usage (Petr Písař)
* Add quotasync(1) manual page (Petr Písař)
* quotacheck: Make sure -d provides at least as much information as -v (Jan Kara)
* Do not fiddle with quota files on XFS and GFS (Petr Písař)
* Recognize units at inode limits by edquota (Petr Písař)
* Recognize units at inode limits by setquota (Petr Písař)
* Recognize units at block limits by edquota (Petr Písař)
* Recognize block limit units on setquota standard input (Petr Písař)
* Recognize units at block limits by setquota (Petr Písař)
* Fix compilation without RPC support (Jan Kara)
* Make group warning message more official (Petr Písař)
* Updated Czech translation (Petr Písař)
* warnquota: Use current locale as default charset (Jan Kara)
* warnquota: Add MIME-Version header (Jan Kara)

Changes in quota-tools from 4.00 to 4.01
* fix compilation failure with --enable-bsd_behaviour=no (Jan Kara)
* fix quota(1) for NFS mountpoints (Jan Kara)
* fix reporting of huge quota limits over rpc (Jan Kara)
* fix repquota to report all users on XFS (Jan Kara)
* fixed edquota(8) for more users (Jan Kara)
* remove fixed limit on number of autofs mount points (Jan Kara)
* add quota type names to message catalogue (Jan Kara)
* typo fixes, message changes for easier i18n (Jan Kara)
* created Czech translation (Petr Pisar)
* store PID of quota_nld into lock file (Petr Pisar)
* warnquota: Fix manpage formatting (Jan Kara)
* warnquota: Allow specifying of filesystems to check (Jan Kara)
* add support for quotas on ext4 in system files (Jan Kara)
* quotaon: Remove duplicated check for hasquota() (Jan Kara)
* quotacheck: Fix warning about journaled quota for 3.0 and newer kernels (Jan Kara)
* edquota: Fix localication of time units (Jan Kara)
* rip out ALTFORMAT config option (Jan Kara)
* add support for dynamic RPC block to support larger quotas (Petr Pisar)
* check set limits fit into the range supported by RPC transport (Petr Pisar)
* do not report missing utmp record to syslog (Petr Pisar)

Changes in quota-tools from 4.00-pre1 to 4.00
* get_qf_name() does not check quota file presence (Petr Pisar)
* report quotacheck failures by return code (Petr Pisar)
* make global symbols static as possible (Petr Pisar)
* implement repquota for filesystems without quota files (Jan Kara)
* initialize v2r1 ddquot padding in dump (Jan Kara)
* fix ddquot buffer leak (Petr Pisar)
* fix check in setgraces() in setquota.c (Petr Pisar)
* forbid grace time setting over RPC (Jan Kara)
* fix synopsis and properly report errors during remote grace period setting (Jan Kara)
* do not use real domains in warnquota example (Petr Pisar)
* make RPC handle properly host names with colons (Jan Kara)
* explain meaning of the second column in repquota output (Jan Kara)
* initialize vfsold block and inode value boundaries for new quota file (Petr Pisar)
* setquota manpage typo fix (John Bradshaw)
* implement quotacheck for GFS2 (Abhijith Das)
* add quotasync tool (Abhijith Das)
* correct --no-mixed-pathnames documentation (Petr Pisar)
* allow admin to not strip quota binaries while installing them (Jan Kara)
* document --always-resolve at edquota and setquota (Petr Pisar)
* comment example quotatab to silent warnquota (Petr Pisar)
* improve comments in warnquota.conf (Ondrej Vasik)
* fix help text for quotaoff (Ondrej Vasik)
* make quota, setquota, and edquota recognize -h option (Ondrej Vasik)
* check whether set limits fit into range supported by quota format (Jan Kara)
* add next3 support (Amir G)
* remove checking of filesystem type from hasquota() (Jan Kara)
* create quota-nfs.sh script for nicer quota(1) output formatting on some NFS clients (Jan Kara)
* add options for quota(1) modifying formatting of filesystem identificaion (Jan Kara)
* minor updates of manpages (Jan Kara)
* quotactl manpage was moved to man-pages package (Jan Kara)
* fix quotaon to work properly with XFS filesystems (Eric Sandeen, Jan Kara)
* fix quotaon to print all informational messages only in verbose mode (Jan Kara)
* fix warnquota manpage to not speak about RPC (Jan Kara)
* fix repquota to get latest quota info header (Jan Kara)
* do not count system inodes into quota for ext[234] (Jan Kara)
* improve detection of XFS kernel quota interface (Jan Kara)
* support of GFS2 filesystem (Christoph Hellwig)
* avoid memory corruption of NULL address (Petr Pisar)
* fixup typos in manpages (Michael Meskes)
* added german translation (Michael Bunk)
* added --enable-static-link configure option (Jan Kara)

Changes in quota-tools from 3.17 to 4.00-pre1
* don't try to set inode flags when getting them failed (Michalski Wojciech)
* added liblber to the list of libraries needed for LDAP support (Michael Meskes)
* Rewritten configuration script to create config.h (Jan Kara)
* Use /proc/mounts for mountpoint scanning (Jan Kara)
* Removed use of reserved identifiers (Jan Kara)
* Improved manpage of quota_nld (Eddie Eyles)
* Fixed long option handling of quota_nld (Jan Kara)
* Fixed error reporting when rpc format specified on command line (Jan Kara)
* Convert quota limits using rq_bsize from RPC request (Jan Kara)
* Added noreturn attribute to die to avoid false warnings (Jan Kara)
* 64-bit quota support, rewritten some code to allow clean integration (Jan Kara)
* Improved header of quota an repquota output when -s option is used (Jan Kara)
* Fixed mountpoint scanning when NFS mountpoint is specified on command line (Jan Kara)
* Updated manpage of quotactl(2) (Jan Kara)

Changes in quota-tools from 3.16 to 3.17
* Updated quotactl(2) manpage to mention possible ERANGE error (Jan Kara)
* Fix hostname checking of rpc.rquotad. It could allow access even though hostname was in /etc/hosts.deny (Jan Kara)
* do not allow setting of user's grace time when softlimit is not exceeded (Jan Kara)
* fix reference to rpc manpage (anonymous reporter)
* add EXT4 (not only EXT4DEV) to the list of supported filesystems (Mingming Cao)
* fix setting of more than 31-bit block and inode limits (Gui Xiaohua)
* fixed bug in error reporting when quota reading fails (Jan Kara)
* added support for quota formats with hidden quota files (Jan Kara)
* remove IMMUTABLE flag from quota file in quotacheck (Jan Kara)
* fix bug in warnquota which could result in bogus hostname and domainname (anonymous reporter)
* implemented writing of messages that user got below hard/soft limits to quota_nld (Jan Kara)
* use PKG_CHECK_MODULES to check for DBUS (Ladislav Michnovic)
* Implement setting of charset for emails sent by warnquota (Michael Meskes)
* Added quota_nld to the list of installed programs (Jan Kara)
* some typos fixes (Matthew Boyle)
* fixed possible segfault when unpriviledged user run edquota (Matthew Boyle)
* fixed format strings to use "%llu" and "%lld" instead of "%Lu" and "%Ld" (Ladislav Michnovic)
* removed ssl, resolv, lber from the list of LDAP libraries since we don't need them directly (Jan Kara)
* added limits.h include to quota_nld (Jan Kara)
* fixed repquota to work with limits over 4 TB (Jan Kara, Michael Meier)

Changes in quota-tools from 3.15 to 3.16
* added information message about journaled quota to quotacheck (Jan Kara, Alex Tomas)
* added pointers to quota_nld and warnquota to some manpages (Jan Kara)
* ported quota_nld to libnl-1.1 (Jan Kara)
* let setquota batch mode accept comments and blank lines, add -c option (Jacky Bruno, Jan Kara)
* print more verbose list of compile options when --version specified (Jan Kara)
* quotaon(8) should work only on local filesystems (Ladislav Michnovic)
* made possible to use quota rpc in mixed NFSv3 and NFSv4 environments (Jan Kara) 
* fixed compilation with openLDAP library versions 2.1 and 2.2 (Jan Kara)
* always define allow_severity and deny_severity for older versions of libwrap (Martin Jacobs)
* cleaned up host_access() handling (Jan Kara)
* configure script now correctly reports checking of libwrap (Jan Kara)
* added MPFS to the list of supported filesystems (Dave Boone)
* all binaries are now stripped during installation (Jan Kara)
* updated Polish translations (Jakub Bogusz)
* fixed typo in a quotaon message (Jakub Bogusz)
* fixed warnquota to check URI only if LDAP enabled (Michael Meskes)

Changes in quota-tools from 3.14 to 3.15
* added a wrapper script around setquota which also updates LDAP (Stefan Adams)
* implemented quota netlink daemon to listen to kernel netlink messages and send them
  to DBUS and / or write them to the console (Jan Kara)
* modified configure scripts and warnquota to check for new LDAP library and allow use of URI (Jan Kara)
* fix LDAP scripts to set VISUAL instead of EDITOR (Michael Meskes)
* added ext4 filesystem to the list of supported filesystems (Jan Kara)
* pot.o is now compiled with CFLAGS (Ladislav Michnovic)
* use -fPIE for compilation when available (Jan Kara, Ladislav Michnovic)
* fixed some more problems XFS quotaon (Kouta Ooizumi, Jan Kara)
* fixed two mistakes in quotaon(8) manpage (Utako Kusaka)
* added option -A to quota(1) to report all NFS mountpoints (Jan Kara)
* fixed XFS handling to work with loopback mounted devices (Jan Kara)
* fixed mountpoints scanning to make XFS -x delete command work (Jan Kara)
* fixes of signed vs unsigned int issues (Jan Kara)
* fixed a format string bug in reporting of raw grace times in repquota (Jan Kara)
* added repquota(8) and quota(1) option for better parsable output (Jan Kara)
* fixed error handling in edquota(8) when creating tmp file (Jan Kara)

Changes in quota-tools from 3.13 to 3.14
* updated Polish translations (Jakub Bogusz)
* print user/group names in error messages when cannot get quota information (Michal Marek, Jan Kara)
* added option --always-resolve to force resolving even names with digits only (Jan Kara)
* minor language corrections in manpages (Jan Kara)
* implemented long options parsing for all quota tools (Jan Kara)
* quota(1) has -f option to specify filesystem list (Jan Kara)
* corrected some informal language in messages (Jan Kara)
* we cannot even stat NFS mounts in local mode as server may be unreachable (Jan Kara)
* fixed error messages in getprivs() (Jan Kara, Brian Morris)
* made UID/GID prints unsigned (Matthew Kent)
* fixed very verbose printing for quotacheck (Jan Kara)
* fixed off-by-one bug in mount options parsing (Jan Kara)
* implemented nicer message formatting for warnquota(8) (Jan Kara)
* quota(1) has -w option to supress line wrapping for long device names (Jan Kara)
* quota(1) prints grace time even if hard limit is reached (Jan Kara)
* fixed journaled quota format detection in quotacheck (Jan Kara)

Changes in quota-tools from 3.12 to 3.13
* fixed mistakes in several error messages, improved error reporting functions
  (Dmitry V. Levin)
* volume label and UUID support for reiserfs (Jan Kara)
* support for LABEL= and UUID= on a command line (Jan Kara)
* parse NFSD export table to find pseudofilesystem root for NFSv4 (Jan Kara)
* handle better when quota file should become empty (Niu YaWei)
* minor manpage and help-text fixes (Jan Kara)
* fixed quotacheck(8) to check each block only once (Jan Kara)
* fixed quotacheck(8) messages about corrupted blocks (Jan Kara)
* fixed quotacheck(8) to rename quota files after turning quotas off (Jan Kara)
* added sanity check to quota reporting (Jan Kara)
* fixed check for illegal references in quotacheck(8) (Jan Kara)
* added NFSv4 to the list of supported fs types (Jan Kara)
* updating of progress is now less frequent - should speedup quotacheck -v a bit (Jan Kara)
* added printing of directories to quotacheck(8) (Jan Kara, Jan Engelhardt)
* added dynamic mountpoint array allocation (Jan Kara)
* made quotacheck(8) more friendly to journaled quota (Jan Kara)
* changed configure to detect whether nls is needed (Tomasz Kloczko, Jan Kara)
* added JFS into a set of supported filesystems (David Kleikamp)
* added French translation (Jerome Schell)
* fixed quota tools to set of grace time only after exceeding soft limit, not
  at reaching (Jan Kara)
* fixed exit codes of setquota(8) and edquota(8) (Jan Kara)
* updated Polish translations (Jakub Bogusz)
* fixed "bashism" is Makefile (Michael Meskes)

Changes in quota-tools from 3.11 to 3.12
* fixed bug in quotaon(8) reporting (Paul Szabo)
* added manpages for xqmstats & quotastats (Max Vozeler)
* fixed a few memleaks (Jan Kara)
* fixed bug when root had no usage and limits (Jan Kara)
* added a few perl wrappers for LDAP (Stefan Adams)
* added note about availability of -r option to manpages (Jan Kara)
* maximal number of groups is now got via sysconf (Nathan Scott)
* added batch mode to the setquota(8) (Jan Kara)
* added reference to setquota(8) to manpages of other tools (Jan Kara)
* fixed bug in --port option of rquotad (Max Kalika)
* updated quota documentation (Jan Kara)
* disabling nls via configure (Jan Kara)
* fixed warning when gettext not used (Peter Breitenlohner)
* fixed typo in rquotad.8 (Peter Breitenlohner)
* fixed compiler warning in quotacheck.c (Peter Breitenlohner)
* added config option for putting some important binaries to /sbin regardless
  $(prefix) (Jan Kara)
* added config option to warnquota(8) for CCing admin only specified amount of
  time before grace time runs out (Jan Kara)

Changes in quota-tools from 3.10 to 3.11
* quota-tools should again use old RPC protocol when needed (Jan Kara)
* add FIOQSIZE for x84_64 architecture (Jan Kara)
* quotacheck(8) does not count quota files to usage (Jan Kara)
* tools now honor journalled quota mount options (Jan Kara)
* manpage of repquota(8) stated falsely that repquota works over RPC (Jan Kara)
* added -T flag to quot(8) to avoid truncation of names (Andre Nathan)
* added -q flag to quot(8) to avoid sorting of names (Andre Nathan)
* added #include <paths.h> in quotasys.c to avoid compile problems on some systems (Jan Kara)
* changed detection of filesystem to be able to parse comma separated list (Jan Kara)
* fixed bug in quotacheck(8) which counted wrongly files larger than 2GB (Posta Zoltan)
* fixed compile problem with quotacheck and new kernels (Michael Meskes, Jan Kara)
* fixed typo in quotacheck manpage (Noel Koethe)
* warnquota(8) can get mail addresses via LDAP (James Bourne)
* warnquota(8) can avoid sending e-mail when user is over quota on mail partition (James Bourne)
* fixed bug in quotacheck(8) which counted directories twice sometimes (Jan Kara)
* edquota(8) now allows parameters in VISUAL/EDITOR env. params (Jan Kara)
* reverted changes in detection of kernel from 3.10 - interface obsoleted in 2.6 kernel (Jan Kara)

Changes in quota-tools from 3.09 to 3.10
* alternative port can be specified to rpc.rquotad by -p option (Jan Kara)
* Fixed processing of device-backed loop mounts (Jari Ruusu)
* Fixed fake error messages from rpc.rquotad (Jan Kara)
* quota(1) now does not print info for NFS filesystems without quotas (Jan Kara)
* XFS roothack option disabled by default (Nathan Scott)
* added option to warnquota(8) to supress details of report (Marco van Wieringen)
* fixed problems with multiple lines values in warnquota(8) (F. Depke)
* changed detection of kernel interface so that it works even without /proc (Jan Kara, Johan Ekenberg)
* updated Polish messages (Jakub Bogusz)
* updated quotactl(2) manpage (Jan Kara)
* fixed bug in -f option of edquota(8) (Jan Kara)
* fixed formatting bug in warnquota(8) (Jan Kara)
* added option -s (choice of more appropriate units) to warnquota(8) (Jan Kara)

Changes in quota-tools from 3.08 to 3.09
* minor update of quota(1) manpage (Jan Kara)
* quotacheck(8) now remembers only hardlinked files and not all inodes with
  n_link > 1 (Jan Kara, Jan Kasprzak)
* quotacheck(8) doesn't store structures for all users in old quota format  (Jan Kasprzak)
* fixed minor bug in documentation (Jan Kara, Lucas Brasilino)
* repquota(8) handles multiple entries in /etc/passwd better (Jan Kara)
* made tools not to touch mountpoints mounted without quota options (Jan Kara)
* added option for ignoring autofs mountpoints to quota(1), quot(8), repquota(8) and rpc.rquotad(8) (Jan Kara, Paul Szabo)
* updated xqmstats (Nathan Scott)

Changes in quota-tools from 3.07 to 3.08
* Fixed infinite loop in quotacheck under RH7.1 (?)
* Made quota tools aware of /etc/services (H. J. Lu)
* Updated edquota(8) and setquota(8) to allow setting of individual grace time (Jan Kara)
* Fixed bug in convertquota(8) when quota was turned on during converting (Jan Kara)
* Add support for XFS filesystems without root special casing (Christoph Hellwig)
* XFS documentation updates (Nathan Scott)

Changes in quota-tools from 3.06 to 3.07
* Added creation of bin and sbin dir during make install; removed hardcoded 
  /sbin directory for some utilities. (Jan Kara)
* Add support for 32 bit uid's and gid's when using EXT2_DIRECT. (Michael Meskes)
* updated manpage of rpc.rquotad (Jan Kara)
* setquota is disabled by default in rpc.rquotad (Jan Kara)
* setquota using RPC is disabled by default in configure (Jan Kara)
* rised maximal number of mountpoint to 256 (Jan Kara)
* small fix in configure (Nathan Scott)
* small fix in quotacheck(8) docs (Jan Kara)
* fixed quotacheck(8) to continue when old quota files were not found (Jan Kara)
* quota(1) now doesn't report failure to connect to rpc.rquotad server when -Q specified (Jan Kara)
* add quota(1) option -l (report only local filesystems) (Jan Kara)
* warnquota(8) now also mails specified member of the group about violation of the group quotas
  when -g option is specified (Jan Kara)
* added options by which user can specify whether repquota(8) should translate names in
  big chunks by scanning all users or individually. Added automagic detection using nsswitch.conf
  which behaviour should lead to faster translating. (Jan Kara)

Changes in quota-tools from 3.05 to 3.06
* fixed caching of libwrap configure result (Jan Kara)
* fixed copying of quotafile name from mtab (?)
* warnquota.conf is now installed in config dir (Jan Kara)
* updated format detection to reflect changes in kernel interface in 2.5.18 (Jan Kara)
* fixed scanning of non-mountpoint directories (Jan Kara)
* fixed detection of XFS format (Jan Kara)
* fixed printing of 'over softlimit sign' in quota(1) (Jan Kara)

Changes in quota-tools from 3.04 to 3.05
* quota tools should honour 'noquota' mount option (Jan Kara)
* fixes in manpages (Arkadiusz Miskiewicz)
* fixed detection of libwrap in configure (Arkadiusz Miskiewicz)
* added forgotten ROOTDIR to path to gettext catalogs (Arkadiusz Miskiewicz)
* quotacheck uses newest format supported by kernel when creating new quota files (Jan Kara)
* fixed bug in IO initialization when -F xfs was given (Jan Kara)
* added support for quota 6.5.1 (Jan Kara)
* quotaon(8) now can get format parameter (Jan Kara)
* fixed bad return value of quota(1) (Jan Kara)
* fixed bug in quota format format detection (Jan Kara)

Changes in quota-tools from 3.03 to 3.04
* added -D_FILE_OFFSET_BITS=64 to Makefile - fixes problems with large files with some libcs (Michael Meskes)
* added -p (print state) to quotaon (Vladimir Linek, Jan Kara)
* made quotaon(8) write better error messages (Jan Kara)
* make install now creates man directories (Jan Kara)
* added -q <quotatab> and -c <configfile> options to warnquota(8) (Jan Kara)
* added some notes about quotatab to warnquota manpage (Jan Kara) 
* fixed bug in options parsing of warnquota(8) (Michael Meskes)
* ignore automount mountpoints (Philippe Troin)
* fixed minor bug in printing grace times (Jan Kara)
* fixed quotaon(8) behaviour when it sees newer kernel then it's able to handle (Jan Kara)
* minor formatting change in quotactl(2) manpage (Nathan Scott)
* init_io() is now more paranoid about quota turned on in kernel (Jan Kara)

Changes in quota-tools from 3.02 to 3.03

* added -f <filesystem> option (perform operation only for given filesystem) for edquota (Jan Kara)
* quotacheck now skips quota file scanning when file not found (Jan Kara)
* repquota shouldn't show grace times when softlimit is not exceeded (Jan Kara)
* removed bogus error message in mountpoint scanning (Jan Kara)
* fixed mountpoint scanning initialization (solved rpc.rquotad SEGFAULT) (Jan Kara)
* rpc.rquotad now doesn't need mountpoint for quota operations (Jan Kara)
* fixed compilation on sparc (Michael Meskes, Jan Kara)

Changes in quota-tools from 3.01 to 3.02

* added -n option (don't resolve names) to repquota (Jan Kara)
* quota tools now correctly handle zero grace times in old format (Jan Kara)
* edquota, setquota commit just grace times and flags - fixed possible races
  when used on live filesystem (Jan Kara)
* another fix to quotastats (Jan Kara)
* added check to format detection for bad endianity (Jan Kara)
* implemented conversion of files with bad endianity (Jan Kara)
* fixes in warnquota, warnquota now allows line splitting by '\', text of mail
  can be specified in config file (Jan Kara)

Changes in quota-tools from 3.01-final to 3.01

* quotastats should now work better on old kernels (Jan Kara)
* quotacheck is more strict in checking it's arguments (Jan Kara)
* edquota and setquota should be now save to run for working user
  (number of used blocks and inodes could be wrong in previous versions)
  (Jan Kara)

Changes in quota-tools from 3.01-pre9 to 3.01-final

* quotacheck is using ext2_ino_t if defined (Jani Jaakkola, Jan Kara)
* rpc.rquotad now closes stdin, stdout unless run on foreground (Jani Jaakkola)
* setquota can be disabled in rpc.rquotad by commandline option (Jani Jaakkola)
* quota-tools should now work well also on RH 7.1 (Anders Blomdell, Jan Kara)
* quotacheck makes backup files only when told by option (Preston Brown)
* quotacheck now uses vfsv0 format when no quotafile is found (Jan Kara)
* fixed mountpoint scanning bug when bad mountpoint was specified (Jan Kara)
* fixed bug when device was specified instead of mountpoint (Preston Brown)
* fixed bug when scanning mountpoint NFS mounted filesystem (Jan Kara)
* repquota now resolves more names at once which makes it
  a lot faster (Jan Kara)


Changes in quota-tools from 3.01-pre8 to 3.01-pre9

* Improved host access handling (Jan Kara)
* Improved RPC error reporting (Jan Kara)
* Fixed bug in quotaon when run of kernel with XFS (Jan Kara)
* Implemented new mtab scanning with fallback to fstab when mtab not 
  found (Jan Kara)
* Improved speed of repquota for old quota format (Jan Kara)
* New Makefile style (Jan Kara)
* Fixed bug in configure in detecting of e2fslib (Jan Kara)
* Implemented automatic choice of units in quota(1) and repquota(8) (Jan Kara)


Changes in quota-tools from 3.01-pre7 to 3.01-pre8

* Fixed typo in option in convertquota. (Jan Kara)
* Grace times are updated when quota limits are set. (Jan Kara)
* Fixed possible segfault in rpc.rquotad when no filesystems with quota
  were found. (Jan Kara)


Changes in quota-tools from 3.01-pre6 to 3.01-pre7

* Fixed a bug in quotacheck (SEGFAULT on -aR) (Jan Kara)
* Fixed bug in rquota (grace times) (Jan Kara)


Changes in quota-tools from 3.01-pre5 to 3.01-pre6

* Fixed bug in quotacheck for new quota format (it created corrupted quota
  files). (Jan Kara)
* Fixed bug in version reporting for quot. (Jan Kara)
* repquota now has -t option - when specified it will be truncating names so
  output will be nicer (Jan Kara)


Changes in quota-tools from 3.01-pre2 to 3.01-pre5

* Fixed endian bug in the ext2 mount by LABEL or by UUID handling code, and
  added XFS support to this code also.  (Nathan Scott)

* Fix bug in handling of multiple mount points sharing the same device.
  (Jan Kara)

* Fix warnquota output for devices with long names.  (Jan Kara)

* Updated man pages.  (Jan Kara, Nathan Scott)

* Added a port of the BSD quot(8) utility, with XFS support.  (Nathan Scott)

* Added xqmstats(8) utility for reporting activity statistics for the XFS
  Quota Manager - XQM.  (Nathan Scott)

* Fix up numerous compiler warnings and all the minor problems that revealed -
  package now compiled with -Wall by default.  (Jan Kara, Nathan Scott)

* Rewrote the error output handler (now uses errstr function) which also
  displays the correct programname of the program issueing the error.

* Additional configure option BSD_BEHAVIOUR for more the old BSD behaviour
  as wanted by some people.

* EOF -> -1, sprintf -> snprintf fixes

* Don't turn quotas on on NFS

* Fixed quota format detection, related bugs in quotaon

* IO code now allows readonly access, doesn't open quotafile when not needed

* Fixed bug in old quotaformat initialization

* quota(1) now exits with nonzero exitcode when over quota

* Manpage cleanup


Changes in quota-tools from 2.00 to 3.01-pre2

* This is a complete rewrite of the quota package, most importantly adding
  support for the new Linux quota format and also support for XFS quota.

* The internal data structures and algorithms were redesigned and rewritten by
  Jan Kara (jack@ucw.cz) so that different versions and different types of
  quota can be used with these tools.

* Support for XFS quota has been added by Nathan Scott (nathans@sgi.com).
  
* Add options like RPC, ALT_FORMAT, RPC_SETQUOTA, EXT2_DIRECT to configure.
  (Jan Kara)

* Fix atoi() -> strtol() and detect mistakes in numeric input.  (Jan Kara)

* Add '-V' option to all tools to display the version.  (Jan Kara)

* Reworked time conversion routines.  (Jan Kara)

* setquota - added -t parameter and allow variable number of filesystems to
  be specified.  (Jan Kara)


Changes in quota-tools from 1.70 to 2.00

* Added patches from Steven Walker <smw8923@cmsu2.cmsu.edu> for supporting
  rpc_setquota call and tcp-wrappers check in rquotad.

* Splited quota manipulation from setquota, edquota, quota etc. to quotaops.c
  so things are coded only once. Also added support for remote quota editing
  and setting using rquota extensions.

* Fixed problems with parsing of /etc/fstab in hasquota.c (incorrectly
  assumed that it was the only option followed by an '='). Patch by
  Simon Huggins <huggie@earth.li>.

* Extracted quota-io into quotaio.c so we only need to update repquota.c and
  quotaio.c when we change the way quotas are stored in the quotafile for bigger
  uids and gids.

* Added prototype user copying to setquota ala edquota -p only this
  time only for a specific filesystem.

* Fixed quota tools for quotas bigger then 4 Gb.
  Patch by Stephen C. Tweedie <sct@redhat.com>

* Changed rpc.rquotad to scan all device entries in /dev to support also devfs
  systems and systems with special hardware RAID controllers.

* Added autoconf support to the quota-utils.
  Patches by Andreas Gruenbacher <a.gruenbacher@bestbits.at>

* Added extra filesystem types to mntent to reflect the current linux filesystems

* Rewrote hasquota.c to check for the MNTOPT_QUOTA option.
  (Request from Phil Stracchino <alaric@babcom.com>)

* Removed searching of /dev dir from rquota_server. Only lookup mounted filesystems.
  (Patch by Roman Kagan <Roman.Kagan@itep.ru>)

* Added gettext NLS support all credits go to the guys named in the
  README.gettext.

* Added the redhat patches to the standard tree.
	* blocksize patch
	* fhs patch
	* hjl patch
	* label patch
	* SPARC patch

* Changed Q_SETQUOTA to Q_SETQLIM in quotaops.c for the putprivs function. This fixed
  a problem where we restore bogos usage info by edquota etc. when a user resets its
  quota usage while running for example edquota. We should only change the limits
  because thats the only things we can change using these kind of tools.
  (Bug report by Dr. Michael Meskes <michael@fam-meskes.de> from the Debian bug-archive)

* Added numeric option to quota and setquota to allow to set quota for users/groups not
  in the localy known through name-services.
  (Modified the patches send by Oscar Martín <oscar@cdrtcampos.es>)

Changes in quota-tools from 1.65 to 1.70

* Fixed problems when turning off one type of quota taking offline the
  other type too.

* Fixed bugs as reported on bugtraq for negative ids and problems
  with usernames with only digits.

* Added setquota (to se quotas from the commandline) as send to me by
  Martin Bene <mb@sime.com>

Changes in quota-tools from 1.60 to 1.65

* Created new diffs again for the newer kernel (2.1.[78]x).

* Added sample program that copies quota-settings from one user
  to an other.

* Added /etc/quotatab support as developed by Jon Lewis
 <jlewis@inorganic5.fdt.net>

* Added some changes to /usr/src/linux/fs/nfsd/vfs.c to support quotas
  for the kernel-nfsd too. (Most other filesystems are gone and the ones
  remaining either don't need quotas or are not used by big groups of users.)

Changes in quota-tools from 1.55 to 1.60

* Added new option to kernel root_squash which means when that option is
  set the kernel system treats root as any normal user and he cannot
  write to any file anymore without obeing the quota limits.

* Added support for root_squash to quotaon and quotaoff using the new
  rsquash option in mntent. In the run also rewrote the hasquota function.

* Added patches to Makefile.std which should make it more FSSTND compliant.

* Added extra check to rpc.rquotad to check the special device type when
  scanning the /dev dir for the right device.

Changes in quota-tools from 1.52 to 1.55

* Added all patches and enhancements I collected the last few months.
  (As always some have undergone some rewriting and are only a special
   option. But they are in)

* Changed check on ruid in edquota to an access-check on the quota-files.
  If you have write permissions on the quota-files as a group its probably
  ok to allow you to change the quotas. If not the system operator should
  take apropriate actions. Install edquota SUID-root if you want people
  who are able to write to your quotafiles to change quotas. If you don't
  install it SUID root it will only update the files which can give strange
  problems with the kernel overwriting your updates.

* Added the EPS-file of the sheets from Remy Card which he used at the
  Berlin Linux seminar. And because they describe everything in detail
  its a nice enhancement to the current HTML docs.

Changes in quota-tools from 1.50 to 1.52

* Hopefully fixed some problems with makefiles and the like.

* Did some rewrite on the mountlist handling, removed limit on number of
  superblocks by allocating them within the mountlist.
  (This code is not available within the standard kernel. Until I find the
   time and feel like it I will put all my new enhancements in my very own
   (just a bit different) kernel sourcetree back into the mainstream kernels.)

Changes in quota-tools from 1.34 to 1.50

* Wrote some new docs, right into html use Mosaic, Netscape or lynx or
  whatever HTML-browser to see whats in. Also did the manual-pages,
  its just a quick hack hope this helps people using quota.

* Added DIRECT EXT2 access to quotacheck which should make scanning ext2
  disks quite some faster. On the other hand you now need the ext2fs
  libs to compile the quotacheck program. (Enhancement by Edvard Tuinder)

* Added dquot_operations to include/linux/fs.h

* Changed include/linux/quota.h according to new standard.

* Changed fs/dquot.c according to new standard.

* Added support to quotaon-systemcall for initializing the superblock
  with a pointer to the dquot operations.

* Remove fs/fileio.c and include/linux/fileio.h including all references to it.

* Added support to the different filesystems to call the new dquot_alloc and
  dquot_free functions on block/inode allocation or freeing. (currently ext2)

* People can add support to any filesystem if they want, for now I have been
  lazy and only implemented it for ext2-fs. Which by the way is probably
  the most difficult of all the filesystems. If one feels up to it you can
  try adding it to your favorit filesystem. I will accept patches, and
  include them with or without changes.

* Added some patches for dynamic allocation of quotafilenames in hasquota.
  (patches by Remy Card)

* Rewrote quota_transfer again, as a never ending story...

* A new run off cleanups have been taking place, removed the QF_OPENING and
  QF_CLOSING flags because we don't need them anymore. The new code uses dquot
  pointers. If we initialize the dquot pointer after we have setup everything
  we don't have do be afraid that we get dqget calls while we don't want them.

* Fixed some bugs with not dropping dquot pointers which lead to memory leaks
  in the long run because dquots kept being hold because the kernel thought
  it was still being used.

* Added some stats to the code which can be viewed with quotastats. Not real
  interesting at the user level but quite handy debugging the quota system.

Changes in quota-tooles from 1.33 to 1.34

* Changed hasquota.c to not insert a slash when the mnt->mnt_dir already ends
  with a slash. So something like //quota.user shouldn't happen anymore.

* Cleaned up fs/fileio.c, removed some unneeded dummy_inodes in unlink and
  rmdir vfs functions. Now rely on incrementing i_count when deleting a 
  dir or file and release it when I iput the inode. Should work because when
  a executable is running when it gets deleted this also happens. Also
  renamed and cleanup the rest of the funtions. vfs_rename function should
  now also work for a hardlinked file.

* Changed vfs_chown functions to reset SUID and SGID on a chown because the
  new kernel wants that.

* Changed locking on I/O to use semaphores instead off the mnt_flags
  used before. The old stuff could lock quota easily probably because
  the operation wasn't atomic. This should now be fixed.

* Fixed check_bdq to only give back a available blocks when the current
  number of blocks are below the hardlimit. There was a bugfix for this
  one so I applied that.

* Changed has_quota funtion to use a static buffer instead of mallocing
  one everytime it needs one. Hope this helps with the reported memory
  leak on the rquotad.

* Fixed some little bugs in dquot.c with the setting of the QF_OPENING
  flag and not resseting it on failure of opening the quotafile.

* Added changes needed because the VFS-layer changed to use iattr structs
  for the notify_change function.

* Fixed quota_transfer to work again with the new iattr structs, hopefully
  it works ok now. It was brought to my attension that it wasn't working
  the way it should in the old version. So I first checked out the fix that
  I received, but that didn't solve the problem either so I fixed it myself.

* Combined the new writeaccess stuff with the stuff I already had. Also
  cleaned up vfs layer some more because of the use of the new
  vfs_getwriteaccess and vfs_putwriteaccess functions. This also involved
  the quotaon function that should now return a propper errno on failure and
  not the standard EIO that it was in earlier versions.

Changes in quota-tools from 1.32 to 1.33

* Ported the stuff back to the normal kernel to make a diff-file quite easy. 

* Fixed some typos that could trigger a kernel panic because the locking gets
  killed when a quota is exeeded.

* Fixed the stuff to work with the the new-tty-drivers.

* This patches aren't that well tested on the machines I use because I use a
  complete different kernel over here. But thats why this is called BETA
  software. The bigfiles in this package are copies of the files used in my
  kernel so some thing are tested more then others.

* Fixed quotacheck not to memset the whole quota when there are no blocks
  allocated by this user.

Changes in quota-tools from 1.31 to 1.32

* Fixed diff-files, the are now made as unified diffs.

* Checked the specifications for the rquota service, I was correct we only need
  to respond to udp connections. 

Changes in quota-tools from 1.3 to 1.31

* Changed quotacheck program to stuff directories it encounters on a 
  directory stack and check them later on. This way there is at any
  time one directory opened for reading. In the old situation it could
  happen that more then one directory were open at the same time and
  with nasty directory structures this could give to much open directories
  at ones, leading to an error by the O.S.

* Added some hooks for debugging the memory usage by the program, and make
  the stdout used for the -v flag non-buffered for more speed.

* Added variabele to mountstruct for flags, now we can mask when we are 
  opening or closeing a quotafile, when we are we may not give out
  pointers with the dq_get function, otherwise we run into problems
  later on.

* Ok updated fs/*.c missed patch to fs/inode.c that solves a race condition.

* Added vfs_rename function that takes care of renaming files on top of already
  existing files.  We were missing those ones, thanks to David Black for
  reporting this. If there are still problems I will hear so and try to fix them
  as soon as I can.

Changes in quota-tools from 1.2 to 1.3

* We only reply to rpc_quota_request made to the udp port of the
  rquotad, I just removed support for the TCP service, I don't
  think it's needed to have the TCP service for just exchanging
  about 40 bytes of data. Too much overhead setting up a TCP connection.

* Changed vfs_write function within fileio.h to be a bit smarter. If
  the fileposition + number of bytes to be written is less then the
  current size of the file we should even bother checking it. And if
  the number of wanted_blocks equals to 0 why even bother checking
  the quota no changes are made anyway.

* Rewrote the quota stuff to be much more flexible, we now use pointers
  that are located within the inode for fast lookup. This is a bit more
  to setup but is much faster when used over and over again. Its based 
  on the setup used for inode caching and is mostly rewritten code with
  some extensions that were needed for the dquot structs. And of course
  a lot extra because dquot aren't exactly inodes.

* Ok file is called dquot.c again because it specific to diskquotas. If
  we ever get process quota, we have to move the system-call interface to
  the kernel dir.

* splitted fileio header into fileio.c and fileio.h. Fileio.c contains 
  the code for all the functions, fileio.h contains the prototypes for
  the functions when quota is enabled and defines to the the default 
  inode operations if it is disabled.

* Moved device management code to the file fs/super.c and made it a
  bit more general. The stuff now can also be used for other purposes.
  For now it contains the devicename, the directory the filesystem is
  mounted on, a pointer to the superblock and the quota expire times 
  and filepointers, this can be extended in the future and this can be 
  used for other purposes then only quota. Its in super.c because it
  is related to mounting a filesystem. The rootfilesystem is a special
  case for which I don't have a nice solution right now.

* Cleaned up the file file_table.c and renamed it to file.c, otherwise 
  we should call inode.c inode_table.c etc. More is static now, the
  file_table isn't accesable anymore from everywhere, and the functions
  that need the info within file.c should be located within that file.
  A good example is the function used by the vhangup code, it now calls
  a routine within file.c and so we don't have export any data anymore.

* changed decrement quota to reset the DQ_INODES and DQ_BLKS flag on
  a decrement of a quota. It seems that we should bark again when one
  goes over his quota after he removed something, ok should work this
  way.

* changed set_dqblk to set the grace period when a new usage is set
  and one exceeds his softlimit by that operation. Better then just
  setting the graceperiod when he allocates any more inodes or blocks.
  Only can give surprises when logging in but who cares they can ask
  the sysadmin to give them a hand with cleaning there dirs. 

* quotaoff is very simple now just reset all the pointers that point
  to a dquot and trash the cache for all dquots that are related to
  the device being turned of. This way the next time you put it on the
  stuff get read again from disk and not from the cache.

* changed most of the file structs to be a filepointer and request it
  with get_empty_filp. This way we allocate it from the file_table which
  is more the way it should be, Ok I know the dummy_inodes isn't that
  nice either, but for that we don't have an other choice. Also it makes
  live much easier this way. See the core dump stuff.

* used some more constants for setting up the file pointers, this should
  make it easier to read. So ok Edvard ?

* rewrote most functions such as quota_alloc, quota_remove and quota_transfer
  to use a for loop which counts from 0 to the number of quotas -1. This way
  it should be easy to extend the quota stuff to maintain even more types of
  quota. (At the moment I can think of one more, what about quotas for a
  processgroups) :-)

* rewrote quota_transfer, its still the most complicated function of the
  three manipulate functions, but it looks much cleaner then the one we
  had.

* changed the system-call interface again this should be the last time, 
  hope to have it made more intelligent now, most of the calls are quite
  the same, so just set flags and call one functions. Saves some functions.

* And more cleanups to the vfs-layer. Did a kind of indent on all the sources
  in the fs-dir by hand. All references to file pointers are now done by a
  variable that is called filp. This is done to be a bit more consistent all
  through the code. Before is was called file, filp, f etc.

* As of the indent I changed all tabs to be 3 spaces this makes it a bit
  larger but much better to read.

* Someone reported that there are problems with fstab when you use something
  like usrquota=/usr/adm/quota.user,grpquota=/usr/adm/quota.grp. I don't know
  if the problems is also in the new libs, if so I have a replacement here for
  the entire mntent stuff. I wrote this way back and it work ok so if you
  have problems mail me and I will send you the sources. For now I didn't
  include it yet in the standard mainline distribution.

* Ok added hooks to the fork code forgot that, ok this has cost me some
  searching. We must doe an vfs_open_filp when a process forks and the
  filepointers are copied or incremented.

Changes in quota-tools from 1.1 to 1.2

* Changed repquota.c to display at max 8 chars of username.

* Changed rquota_svc.c and rquota_server.c to handle both version 1 
  and 2 requests. Now we should be able to communicate with sun systems.
  SUN systems send out version 1 request which we can handle now.

* Changed quota.c to first send out a version 2 rquota request and if
  that fails to try it with a version 1 request. Now we should be able to
  query a rquotad on a sun-server exporting a NFS disk.

* Changed kernel diffs, now use a header file fileio.h with vfs functions
  for writing, truncating, creating files/nodes. This cleaned up the
  kernel diffs quite a bit. (Should have done this way back, but it is
  done now)

* Fixed some small bugs with handling graceperiods again. Changed the code
  in the systemcall interface all bugs should be gone now there.

* Wrote a new program warnquota. No manpage yet but it has no flags so
  that's simple. You can run this from your crontab just like you run
  quotacheck every night from cron. This program mails a message to all
  users that violated the quota system.

* Changed fileio.h with unlinking and rmdir to make a copy of the inode.
  Hope this fixes some problems we have seen with xiafs. It isn't to bad
  either should have been this way from the beginning. A pointer to a
  inode that is removed is a bit to tricky a copy in local memory is much
  saver.

* Changed fs/quota.c to not check if the quotafile is on the same device
  as the device for which it contains info. Found that in a document but
  it's silly and so it's removed now. Who cares where you put it as long
  the kernel can find it and it is the right format.
  (Now something like usrquota="/var/adm/quota_src.user" should work :-))

* Changed edquota behaviour with -p flag. It now copies the current
  usage to the new situation.

Changes in quota-tools from 1.0 to 1.1

* Moved check to test on quota on a certain filesystem to seperate file
  hasquota.c

* Changed hasquota.c to use quotafile given in fstab file instead
  of the default name of a quotafile. We now can define ourself where
  to put our quotafile. Something like "usrquota=/usr/adm/quotasrc.user"

* Changed graceperiod counting was doing it the wrong way around. Now we
  add the expiretime to the current time and that is the grace-period a user
  has before we see a softlimit as a hardlimit.

* Changed allocation when not enough blocks can be allocated from ones quota.
  Now you get as many blocks as you can affort yourself and not as in the 
  earlier version, nothing. This was a bit of a bitch to tackle but it seems
  to work ok now for regular files and core-files.

* Changed the quota.h file to include a prototype for a new function
  blocks_to_isize that calculates the maximum isize for a file when allocating
  less blocks than requested. Also included macro's for min() and max().

* Added rquotad program for own convinience, this was build from scratch with
  only the rquota.x file. It seems to work quite nice between LINUX machines
  don't have the resources to test it with other then LINUX machines.
  We probably need a new version number for this type of rquota.
  Something like rquota version 2 or something like that.

* Changed quota program to use a rpc-call to the rquotad on one of you
  disk server machines. See #ifdef RPC in quota.c. Use small timeout because
  I don't wanna wait to long when a machine is down. Increase it when you have
  problems with slow hosts.

* Rewrite of quotacheck program. This one is much faster, about 60%. Thanks
  to Edvard for this big improvement.

* Changed namei.c to iput the inode of a dir when doing a remove of a dir.
  I never had problems with it but it seems that ext2 doesn't care to much when
  you unlink a dir while you have the inode still open. Fixed it and it works
  now ok also on xiafs which had problems with it, and of course the fragment
  should have give this error because you have to iput the dir before you remove
  it.

* Changed source of quotacheck to create new quotafile with at least the
  gracetimes. Now there should never be a problem when turning on quota with
  the quotactl systemcall after one has run quotacheck to create the correct
  quotafiles.
  
* Changed code of quota.c to read MOUNTED(mtab) instead of FSTAB(fstab) when
  showing quotainfo.